L&W 100 E ECO
Lightweight high-pressure compressor for the full air supply on site. Ready for connection with cable and plug. Ideal for mobile use. The LW 100 ECO is made 100% of the prover elements of the successful LW 100 Series. The main components such as: motor, compressor block, filter system and filling device are fully integrated. |
Specifications
â–ª |
Fully wired, ready to start with cable and plug, start/stop switch |
â–ª |
Aluminium frame |
â–ª |
All pistons with steel piston rings |
â–ª |
Filling hose with filling valve and pressure gauge |
â–ª |
200/232 bar version with DIN/Yoke connection, 300 bar version with DIN connection |
â–ª |
Fan belt guard and block cowling for improved cooling air flow |
â–ª |
2 oil/water separators, safety valve for each stage |
â–ª |
Inter-stage and final stage air coolers |
â–ª |
Pressure maintaining and non return valve for extended filter duration |
â–ª | Breathing air purification in accordance with EN 12021 |
Technical Data
LW 100 E ECO |
|
Type: |
Air cooled, reciprocating piston compressor |
Capacity [litre/min]: |
100 |
Capacity [Nm³/h]: |
6 |
Capacity [cfm]: |
3.5 |
Max. Pressure [bar]: |
330 (set at the final stage safety valve) |
RPM: |
2300 |
No of stages / No of cylinders:: |
3 / 3 |
Bore 1st stage [mm]: |
60 |
Bore 2nd stage [mm]: |
30 |
Bore 3rd stage [mm]: |
12 |
Stroke [mm]: |
24 |
Prime mover type: |
3 Phase E-motor 400V / 50Hz |
Drive power [kW]: |
2.2 |
Drive power [HP]: |
3.0 |
Cooling air requirement [Nm³/h]: |
660 |
Lubrication type: |
Splash oil |
Oil capacity [litre]: |
0.5 |
Air outlet temperature [°C]: |
6°C above ambient |
Filter capacity [m³ at +20°C]: |
108 |
Dimensions L x W x H [cm]: |
65 x 39 x 40 |
Weight [kg]: |
39 |
Noise level: |
82 (dB measured at 1 m distance) |
This Product was added to our catalogue on Wednesday 14 September, 2011.