LW 100 E1 ECO
Lightweight high-pressure compressor for the full air supply on site. Ready for connection with cable and plug. Ideal for mobile use. The LW 100 ECO is made 100% of the prover elements of the successful LW 100 Series. The main components such as: motor, compressor block, filter system and filling device are fully integrated.
|
Specifications
â–ª
|
Fully wired, ready to start with cable and plug, start/stop switch
|
â–ª
|
Aluminium frame
|
â–ª
|
All pistons with steel piston rings
|
â–ª
|
Filling hose with filling valve and pressure gauge
|
â–ª
|
200/232 bar version with DIN/Yoke connection, 300 bar version with DIN connection |
â–ª
|
Fan belt guard and block cowling for improved cooling air flow |
â–ª
|
2 oil/water separators, safety valve for each stage |
â–ª
|
Inter-stage and final stage air coolers |
â–ª
|
Pressure maintaining and non return valve for extended filter duration |
â–ª |
Breathing air purification in accordance with EN 12021 |
|
Technical Data
LW 100 E1 ECO
|
|
Type:
|
Air cooled, reciprocating piston compressor
|
Capacity [litre/min]:
|
100
|
Capacity [Nm³/h]:
|
6
|
Capacity [cfm]:
|
3.5
|
Max. Pressure [bar]:
|
330 (set at the final stage safety valve) |
RPM:
|
2300
|
No of stages / No of cylinders::
|
3 / 3
|
Bore 1st stage [mm]:
|
60
|
Bore 2nd stage [mm]:
|
30
|
Bore 3rd stage [mm]:
|
12
|
Stroke [mm]:
|
24
|
Prime mover type:
|
Single phase E-Motor 230V 50Hz
|
Drive power [kW]:
|
2.2
|
Drive power [HP]:
|
3.0
|
Cooling air requirement [Nm³/h]:
|
660
|
Lubrication type:
|
Splash oil
|
Oil capacity [litre]:
|
0.5
|
Air outlet temperature [°C]:
|
6°C above ambient
|
Filter capacity [m³ at +20°C]:
|
108
|
Dimensions L x W x H [cm]:
|
65 x 39 x 40
|
Weight [kg]:
|
39
|
Noise level:
|
82 (dB measured at 1 m distance)
|
|
This Product was added to our catalogue on Wednesday 14 September, 2011.