LW 245 B
|
Portable compressor with a reliable Honda 4 stroke motor for optimum mobility and reliability independent of power supplies. The easy to operate units have established themselves as ideal compressors for remote expeditions and safaris. Despite the compact form and low weight, the filling times are kept to a minimum with a powerful delivery rate. |
Specifications
|
▪ |
Ready to start unit with 4 stroke 6.6 kW Honda motor with pull start |
| ▪ | Drive motor with auto cut off for low oil level |
|
▪ |
1 Filling hose with filling valve and pressure gauge |
|
▪ |
Steel frame with carrying handles |
|
▪ |
GRP fan belt guard |
|
▪ |
2 oil/water separators, safety valve for each stage |
|
▪ |
Stainless steel cooling pipes and inter-coolers |
| ▪ | Pressure maintaining valve for extended filter duration |
|
▪ |
2.5 m air inlet hose |
| ▪ | Breathing air purification in accordance with EN 12021 |
Technical Data
|
LW 245 B |
|
|
Type: |
Air cooled, reciprocating piston compressor |
|
Capacity [litre/min]: |
245 |
|
Capacity [Nm³/h]: |
14.7 |
|
Capacity [cfm]: |
8.7 |
|
Max. Pressure [bar]: |
330 (set at the final stage safety valve) |
|
RPM: |
2000 |
|
No of stages / No of cylinders:: |
3 / 3 |
|
Bore 1st stage [mm]: |
76 |
|
Bore 2nd stage [mm]: |
28 |
|
Bore 3rd stage [mm]: |
13 |
|
Stroke [mm]: |
39 |
|
Prime mover type: |
4 stroke gasoline engine, hand start |
|
Drive power [kW]: |
6.0 |
|
Drive power [HP]: |
9.0 |
|
Cooling air requirement [Nm³/h]: |
1800 |
|
Lubrication type: |
Plunger/Splash oil |
|
Oil capacity [litre]: |
0.8 |
|
Air outlet temperature [°C]: |
8 - 10 °C above ambient |
|
Filter capacity [m³ at +20°C]: |
200 |
|
Dimensions L x W x H [cm]: |
92 x 45 x 57 |
|
Weight [kg]: |
94 |
|
Noise level: |
93 (dB measured at 1 m distance) |
This Product was added to our catalogue on Monday 19 September, 2011.